hotkeys issue
Moderators: Lavish Software Team, Moderators
-
- GamingTools Subscriber
- Posts: 18
- Joined: Mon Sep 20, 2004 10:38 pm
- Location: New Zealand
- Contact:
hotkeys issue
Hi, when i switch windows (use ctrl+alt+#) it seems to keep thinking i have ctrl+alt pressed, so pressing "m" would toggle the memory indicator.
This is annoying when you swap windows to chat and you start getting popup windows in the way and the keys dont respond.
If you do a ctrl+alt+command (eg m) in a window it will free it up so it works properly again.
I am running the RC3 version, and it has listed fixed what sounds like the same issue I am having (it was a fresh install of WinEQ)
This is annoying when you swap windows to chat and you start getting popup windows in the way and the keys dont respond.
If you do a ctrl+alt+command (eg m) in a window it will free it up so it works properly again.
I am running the RC3 version, and it has listed fixed what sounds like the same issue I am having (it was a fresh install of WinEQ)
Sure thing, here is the file requested.
WinEQ 2 System Information
System:
-----------------------------------
Windows Version: Microsoft Windows XP/Service Pack 2/2600.xpsp_sp2_rtm.040803-2158
System Physical RAM: 1308/2046MB
Page File: 3287/3945MB
Virtual Memory: 1992/2047MB (Extended: 0MB)
CPU 1: Intel(R) Pentium(R) 4 CPU 2.80GHz @ 2798MHz
CPU 2: Intel(R) Pentium(R) 4 CPU 2.80GHz @ 2798MHz
Video 1: \\.\DISPLAY1/RADEON 9800 PRO
Video 2: \\.\DISPLAY2/RADEON 9800 PRO - Secondary
Video 3: \\.\DISPLAYV1/NetMeeting driver
Video 4: \\.\DISPLAYV2/RDPDD Chained DD
Sound: SB Live! Audio [DF40]
DirectX: 4.09.00.0904
Internet Explorer: 6.0.2900.2180
WinEQ: 2.00 RC3
Direct3D9:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
Direct3D8:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
DirectInput8:
-----------------------------------
EverQuest:
-----------------------------------
Profile 1: WinEQ 2.0 Default Profile
EQ Path: C:\EverQuest
EQClient.ini: .\eqclient.ini
Patch: OFF Test Server: OFF Locale: us
Video Adapter: Application Controlled
Luclin models: 1 (+5 min RAM)
Texture Caching: ON (+0 min RAM)
Texture Quality: LOW (+0 min RAM)
Sky: COMPLEX (+10 min RAM)
Calculated minimum RAM: 298MB (BASE+15MB)
Level of Detail: 1
MaxFPS: 100
Additional setting: HardwareTnL=FALSE
Additional setting: VSync=1
Additional setting: VertexShaders=0
Additional setting: 20PixelShaders=0
Additional setting: 1xPixelShaders=0
EQPlayNice:
-----------------------------------
EQ Version: eqgame.exe Oct 11 2004 15:21:50
Foreground
Mode: CPU Limiter
Max FPS: 40
Rendering: 1/1
Background
Mode: CPU Limiter
Max FPS: 30
Rendering: 1/30
WinEQ 2 System Information
System:
-----------------------------------
Windows Version: Microsoft Windows XP/Service Pack 2/2600.xpsp_sp2_rtm.040803-2158
System Physical RAM: 1308/2046MB
Page File: 3287/3945MB
Virtual Memory: 1992/2047MB (Extended: 0MB)
CPU 1: Intel(R) Pentium(R) 4 CPU 2.80GHz @ 2798MHz
CPU 2: Intel(R) Pentium(R) 4 CPU 2.80GHz @ 2798MHz
Video 1: \\.\DISPLAY1/RADEON 9800 PRO
Video 2: \\.\DISPLAY2/RADEON 9800 PRO - Secondary
Video 3: \\.\DISPLAYV1/NetMeeting driver
Video 4: \\.\DISPLAYV2/RDPDD Chained DD
Sound: SB Live! Audio [DF40]
DirectX: 4.09.00.0904
Internet Explorer: 6.0.2900.2180
WinEQ: 2.00 RC3
Direct3D9:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
Direct3D8:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
DirectInput8:
-----------------------------------
EverQuest:
-----------------------------------
Profile 1: WinEQ 2.0 Default Profile
EQ Path: C:\EverQuest
EQClient.ini: .\eqclient.ini
Patch: OFF Test Server: OFF Locale: us
Video Adapter: Application Controlled
Luclin models: 1 (+5 min RAM)
Texture Caching: ON (+0 min RAM)
Texture Quality: LOW (+0 min RAM)
Sky: COMPLEX (+10 min RAM)
Calculated minimum RAM: 298MB (BASE+15MB)
Level of Detail: 1
MaxFPS: 100
Additional setting: HardwareTnL=FALSE
Additional setting: VSync=1
Additional setting: VertexShaders=0
Additional setting: 20PixelShaders=0
Additional setting: 1xPixelShaders=0
EQPlayNice:
-----------------------------------
EQ Version: eqgame.exe Oct 11 2004 15:21:50
Foreground
Mode: CPU Limiter
Max FPS: 40
Rendering: 1/1
Background
Mode: CPU Limiter
Max FPS: 30
Rendering: 1/30
-
- GamingTools Subscriber
- Posts: 18
- Joined: Mon Sep 20, 2004 10:38 pm
- Location: New Zealand
- Contact:
Heres the Sysinfo.txt
Code: Select all
WinEQ 2 System Information
System:
-----------------------------------
Windows Version: Microsoft Windows XP/Service Pack 2/2600.xpsp_sp2_rtm.040803-2158
System Physical RAM: 106/1023MB
Page File: 1619/2463MB
Virtual Memory: 1997/2047MB (Extended: 0MB)
CPU 1: AMD Athlon(tm) XP 2400+ @ 2000MHz
Video 1: \\.\DISPLAY1/NVIDIA GeForce FX 5600XT
Video 2: \\.\DISPLAY2/NVIDIA GeForce FX 5600XT
Video 3: \\.\DISPLAYV1/NetMeeting driver
Video 4: \\.\DISPLAYV2/RDPDD Chained DD
Sound: SB Live! Audio [E800]
DirectX: 4.09.00.0904
Internet Explorer: 6.0.2900.2180
WinEQ: 2.00 RC3
Direct3D9:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
Direct3D8:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
DirectInput8:
-----------------------------------
EverQuest:
-----------------------------------
Profile 1: WinEQ 2.0 Default Profile
EQ Path: E:\EverQuest
EQClient.ini: .\eqclient.ini
Patch: OFF Test Server: OFF Locale: us
Video Adapter: Application Controlled
Luclin models: 4 (+20 min RAM)
Sound: ON (+22 min RAM)
Texture Quality: LOW (+0 min RAM)
Calculated minimum RAM: 325MB (BASE+42MB)
Level of Detail: 1
MaxFPS: 100
Additional setting: HardwareTnL=TRUE
Additional setting: VertexShaders=1
Additional setting: 20PixelShaders=1
Additional setting: 1xPixelShaders=1
EQPlayNice:
-----------------------------------
EQ Version: eqgame.exe Oct 11 2004 15:21:50
Foreground
Mode: FPS Limiter
Max FPS: 40
Rendering: 1/1
Background
Mode: FPS Limiter
Max FPS: 30
Rendering: 1/30
Just to let you know i still have this problem in RC4.
Have say 3 sessions up, use the default keys to switch among sessions cntrl + alt + 1, 2 or 3. switch between these sessions, now try to type something into a chat box.
What i usually get and it seems like is happening is the cntrl key or alt key being pressed down (so to fix press cntrl or alt to correct issue). thus when trying to type some text hitting certain letters will cause a window to pop up.
Also i'm not sure if its eqwin related or memory related but when i play one of my eqwindows would crash out of the blue. I would be in a zone for awhile switching among windows then all of a sudden crash.
Have say 3 sessions up, use the default keys to switch among sessions cntrl + alt + 1, 2 or 3. switch between these sessions, now try to type something into a chat box.
What i usually get and it seems like is happening is the cntrl key or alt key being pressed down (so to fix press cntrl or alt to correct issue). thus when trying to type some text hitting certain letters will cause a window to pop up.
Also i'm not sure if its eqwin related or memory related but when i play one of my eqwindows would crash out of the blue. I would be in a zone for awhile switching among windows then all of a sudden crash.
I have always used the left ctrl and alt keys. The wierd thing is if i switch from one session to another and another it doesn't always happen, but after several switches or sometimes just one switch the problem occurs in that a cntrl or alt key is "stuck" down.
I wish i could reproduce this problem 100% of the time but sadly i can't. As a programer myself, its hard to fix a bug in which you can't reproduce consistantly.
I wish i could reproduce this problem 100% of the time but sadly i can't. As a programer myself, its hard to fix a bug in which you can't reproduce consistantly.
Hi Lax, not sure if this is same problem.
But I get this.
I changed my switch key to ` key.
(both forwarded and back)
sometimes, when I press it. char I'm switched to changes camera mode. As if I press f9, which I didn't.
I run mq2. happens with all plugins/no plugins
WinEQ 2 System Information
System:
-----------------------------------
Windows Version: Microsoft Windows XP/Service Pack 2/2600.xpsp_sp2_rtm.040803-2158
System Physical RAM: 996/2046MB
Page File: 3009/3943MB
Virtual Memory: 1994/2047MB (Extended: 0MB)
CPU 1: Intel(R) Pentium(R) 4 CPU 3.60GHz @ 3598MHz
CPU 2: Intel(R) Pentium(R) 4 CPU 3.60GHz @ 3598MHz
Video 1: \\.\DISPLAY1/RADEON X800 XT
Video 2: \\.\DISPLAY2/RADEON X800 XT Secondary
Video 3: \\.\DISPLAYV1/NetMeeting driver
Video 4: \\.\DISPLAYV2/RDPDD Chained DD
Monitor 1: \\.\DISPLAY1 (0,0,1280,1024) (1280x1024) PRIMARY
Sound: SB Audigy 2 ZS Audio [DF00]
DirectX: 4.09.00.0904
Internet Explorer: 6.0.2900.2180
WinEQ: 2.01
Direct3D9:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
Direct3D8:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
DirectInput8:
-----------------------------------
EverQuest:
-----------------------------------
Profile 3: Wizard
EQ Path: c:\program files\everquest2
EQClient.ini: .\eqclient.ini
Patch: OFF Test Server: OFF Locale: us
Video Adapter: Application Controlled
Luclin models: 29 (+145 min RAM)
Dynamic Lighting: ON (+4 min RAM)
Texture Quality: LOW (+0 min RAM)
Velious Textures #17: ON (+7 min RAM)
Velious Textures #18: ON (+7 min RAM)
Velious Textures #19: ON (+7 min RAM)
Velious Textures #20: ON (+7 min RAM)
Velious Textures #21: ON (+7 min RAM)
Velious Textures #22: ON (+7 min RAM)
Velious Textures #23: ON (+7 min RAM)
Calculated minimum RAM: 481MB (BASE+198MB)
Level of Detail: 0
MaxFPS: 100
Additional setting: VertexShaders=TRUE
Additional setting: 20PixelShaders=TRUE
Additional setting: 1xPixelShaders=TRUE
EQPlayNice:
-----------------------------------
EQ Version: eqgame.exe Oct 11 2004 15:21:50
Foreground
Mode: FPS Limiter
Max FPS: 50
Rendering: 1/1
Background
Mode: CPU Limiter
Max FPS: 50
Rendering: 1/30
But I get this.
I changed my switch key to ` key.
(both forwarded and back)
sometimes, when I press it. char I'm switched to changes camera mode. As if I press f9, which I didn't.
I run mq2. happens with all plugins/no plugins
WinEQ 2 System Information
System:
-----------------------------------
Windows Version: Microsoft Windows XP/Service Pack 2/2600.xpsp_sp2_rtm.040803-2158
System Physical RAM: 996/2046MB
Page File: 3009/3943MB
Virtual Memory: 1994/2047MB (Extended: 0MB)
CPU 1: Intel(R) Pentium(R) 4 CPU 3.60GHz @ 3598MHz
CPU 2: Intel(R) Pentium(R) 4 CPU 3.60GHz @ 3598MHz
Video 1: \\.\DISPLAY1/RADEON X800 XT
Video 2: \\.\DISPLAY2/RADEON X800 XT Secondary
Video 3: \\.\DISPLAYV1/NetMeeting driver
Video 4: \\.\DISPLAYV2/RDPDD Chained DD
Monitor 1: \\.\DISPLAY1 (0,0,1280,1024) (1280x1024) PRIMARY
Sound: SB Audigy 2 ZS Audio [DF00]
DirectX: 4.09.00.0904
Internet Explorer: 6.0.2900.2180
WinEQ: 2.01
Direct3D9:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
Direct3D8:
-----------------------------------
Adapter Display Mode: 0x0 D3DFMT_UNKNOWN
Game Display Mode: 0x0 D3DFMT_UNKNOWN
Current Adapter: 0
DirectInput8:
-----------------------------------
EverQuest:
-----------------------------------
Profile 3: Wizard
EQ Path: c:\program files\everquest2
EQClient.ini: .\eqclient.ini
Patch: OFF Test Server: OFF Locale: us
Video Adapter: Application Controlled
Luclin models: 29 (+145 min RAM)
Dynamic Lighting: ON (+4 min RAM)
Texture Quality: LOW (+0 min RAM)
Velious Textures #17: ON (+7 min RAM)
Velious Textures #18: ON (+7 min RAM)
Velious Textures #19: ON (+7 min RAM)
Velious Textures #20: ON (+7 min RAM)
Velious Textures #21: ON (+7 min RAM)
Velious Textures #22: ON (+7 min RAM)
Velious Textures #23: ON (+7 min RAM)
Calculated minimum RAM: 481MB (BASE+198MB)
Level of Detail: 0
MaxFPS: 100
Additional setting: VertexShaders=TRUE
Additional setting: 20PixelShaders=TRUE
Additional setting: 1xPixelShaders=TRUE
EQPlayNice:
-----------------------------------
EQ Version: eqgame.exe Oct 11 2004 15:21:50
Foreground
Mode: FPS Limiter
Max FPS: 50
Rendering: 1/1
Background
Mode: CPU Limiter
Max FPS: 50
Rendering: 1/30