Resolutions

WinEQ 1.x Lite discussion

Moderators: Lavish Software Team, Moderators

Post Reply
Darkvirtue
Non-Subscriber
Posts: 12
Joined: Wed Jul 14, 2004 2:26 pm

Resolutions

Post by Darkvirtue » Thu Sep 16, 2004 6:20 pm

For some reason I cant get WinEQ will not run at 1280x1024 anymore. I can run 1280x1024 without WinEQ and my desktop is 1280x1024 so it doesnt make any sense. please help
Top
Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Sep 16, 2004 8:47 pm

What's stopping you? It should be in the list in game...
Top
Darkvirtue
Non-Subscriber
Posts: 12
Joined: Wed Jul 14, 2004 2:26 pm

Post by Darkvirtue » Thu Sep 16, 2004 9:47 pm

Its not listed when i open EQ with WinEQ but it is listed if I run it normally.
Top
Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Sep 16, 2004 10:03 pm

Hmmm it really should be. Post WinEQ.log for me.
Top
Darkvirtue
Non-Subscriber
Posts: 12
Joined: Wed Jul 14, 2004 2:26 pm

Post by Darkvirtue » Thu Sep 16, 2004 10:46 pm

WinEQ Version 1.37 Initializing
Profile allowing sound
--- Begin EQ Graphics Settings ---
Luclin models: 3 (+40 min RAM)
Sound: ON (+12 min RAM)
Texture Caching: ON (+0 min RAM)
Texture Quality: LOW (+0 min RAM)
Calculated minimum RAM: 252MB (BASE+52MB)
--- End EQ Graphics Settings ---
Available System Physical RAM: 722MB/1023MB. Load 29%
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D9Proxy::GetAdapterCount()=1
IDirect3D9Proxy::GetAdapterIdentifier(0)...RADEON 9500 PRO / 9700
IDirect3D9Proxy::GetDeviceCaps()
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
WEQ_CreateWindowExA(40000,_EverQuestwndclass,EverQuest,90000000,0,0,100,40,0,0,400000,0)
Locale: us
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::GetAdapterCount()=1
IDirect3D8Proxy::GetAdapterIdentifier(0)...RADEON 9500 PRO / 9700
IDirect3D8Proxy::GetDeviceCaps()
IDirect3D8Proxy::GetAdapterModeCount()
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
IDirect3D8Proxy::Release()
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3D8Proxy::CreateDevice()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 768
BackBufferWidth: 1024
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
Initializing resolution to 1024x768
D3DDEVTYPE_HAL
D3DCREATE_MIXED_VERTEXPROCESSING
D3DCREATE_MULTITHREADED
-- End Requested Direct3D8 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 171MB
WinEQ window size: CUSTOM 1381x1036
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
WEQ_DirectInput8Create(1CB0000,800,0€y¿:H¢Mª™]dí6—,2879358,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
IDirect3DDevice8Proxy::Reset()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 0
BackBufferWidth: 0
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
BackBufferHeight corrected to 768
BackBufferWidth corrected to 1024
EQ Display Mode 1024x768
-- End Requested Direct3D8 Device Information --
-- Actual Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 768
BackBufferWidth: 1024
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType (Antialiasing): D3DMULTISAMPLE_NONE * Can be overridden by drivers
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D8 Device Information --
Available Texture Memory: 174MB
WinEQ window size: CUSTOM 1381x1036
IDirect3D8Proxy::Release()
Top
Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Sep 16, 2004 11:14 pm

I released 1.38 which adds the current windows resolution to the list for you. Close out WinEQ and restart and that resolution should be available in the in-game options window.
Top
Darkvirtue
Non-Subscriber
Posts: 12
Joined: Wed Jul 14, 2004 2:26 pm

Post by Darkvirtue » Thu Sep 16, 2004 11:57 pm

Still is not avalible to me thur WinEQ. Even with newest version. highest res was 1152 x 864.
Top
Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Fri Sep 17, 2004 2:53 am

Hmmm well I certainly dont have WinEQ remove any resolutions. See if changing your desktop resolution to 16-bit color instead of 32-bit makes it show up. You made sure WinEQ updated to 1.38? I'll see if I can double check on this
Top
midknight
Non-Subscriber
Posts: 1
Joined: Sat Jul 17, 2004 1:55 pm

Post by midknight » Fri Sep 17, 2004 9:43 am

also having the exact same problem :(
Top
Amanda
Non-Subscriber
Posts: 2
Joined: Wed Sep 08, 2004 4:15 pm

Post by Amanda » Thu Sep 23, 2004 1:10 pm

Why do I have to change my resolution every time I log into EQ, when I use WinEQ? If I am playing and I crash to server select and go back into the game from there, i get the small window back and have to change resolution as soon as I get back into the game, which in most cases, crashes me to desktop as soon as I choose full screen mode. Please help and tell me how to make it keep my resolution?!!!
Top
Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Sep 23, 2004 3:48 pm

Creshes you to desktop? You should post wineq.log from that.

The window that pops up explains how to keep your resolution. A) Increase desktop resolution B) in WinEQ global preferences check the "Allow larger-than-desktop resolutions"
Top
Amanda
Non-Subscriber
Posts: 2
Joined: Wed Sep 08, 2004 4:15 pm

Post by Amanda » Thu Sep 23, 2004 5:51 pm

Ok, here's my wineq.log from my most recent crash when I camped to server select, also, i check my desktop resolution, it is the same as what I keep changing it to when I do an alt O and change it in options, also, the global preferences box is checked to allow larger-than-desktop resolutions, so I'm still at a loss on that one :cry:

IDirect3DDevice9Proxy::Reset()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 0
BackBufferWidth: 0
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType (Antialiasing): D3DMULTISAMPLE_NONE * Can be overridden by drivers
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
BackBufferHeight corrected to 1024
BackBufferWidth corrected to 1280
EQ Requesting Display Mode 1280x1024
-- End Requested Direct3D9 Device Information --
-- Actual Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D9 Device Information --
Available Texture Memory: 299MB
WinEQ window size: AUTO
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::GetAdapterCount()=1
IDirect3D8Proxy::GetAdapterIdentifier(0)...NVIDIA GeForce2 Ti/nv4_disp.dll/6/14/10/5664
IDirect3D8Proxy::GetDeviceCaps()
IDirect3D8Proxy::GetAdapterModeCount()
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
IDirect3D8Proxy::Release()
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3D8Proxy::CreateDevice()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 600
BackBufferWidth: 800
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
Initializing resolution to 800x600
D3DDEVTYPE_HAL
D3DCREATE_HARDWARE_VERTEXPROCESSING
D3DCREATE_MULTITHREADED
-- End Requested Direct3D8 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 294MB
WinEQ window size: AUTO
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
WEQ_DirectInput8Create(1F90000,800,0€y¿:H¢Mª™]dí6—,19E92E8,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
IDirect3DDevice8Proxy::Reset()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 0
BackBufferWidth: 0
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
BackBufferHeight corrected to 600
BackBufferWidth corrected to 800
EQ Display Mode 800x600
-- End Requested Direct3D8 Device Information --
-- Actual Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 600
BackBufferWidth: 800
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType (Antialiasing): D3DMULTISAMPLE_NONE * Can be overridden by drivers
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D8 Device Information --
Available Texture Memory: 294MB
WinEQ window size: AUTO
IDirect3D8Proxy::Release()
WEQ_DirectInput8Create(400000,800,0€y¿:H¢Mª™]dí6—,8A3F44,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D9Proxy::CreateDevice()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24S8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 600
BackBufferWidth: 800
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
D3DDEVTYPE_HAL
D3DCREATE_MIXED_VERTEXPROCESSING
-- End Requested Direct3D9 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 294MB
WinEQ window size: AUTO
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice9Proxy::Reset()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24S8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 600
BackBufferWidth: 800
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 75
hDeviceWindow: 0
MultiSampleType (Antialiasing): D3DMULTISAMPLE_NONE * Can be overridden by drivers
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 0
EQ Requesting Display Mode 800x600
-- End Requested Direct3D9 Device Information --
-- Actual Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24S8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 600
BackBufferWidth: 800
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D9 Device Information --
IDirect3DDevice9Proxy::Reset() Failed...
D3DERR_INVALIDCALL
Resetting with old settings
Device Reset failure -- Crash imminent. Fail code D3DERR_INVALIDCALL
IDirect3DDevice9Proxy::Reset()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24S8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 600
BackBufferWidth: 800
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 75
hDeviceWindow: 0
MultiSampleType (Antialiasing): D3DMULTISAMPLE_NONE * Can be overridden by drivers
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 0
EQ Requesting Display Mode 800x600
-- End Requested Direct3D9 Device Information --
-- Actual Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24S8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 600
BackBufferWidth: 800
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D9 Device Information --
IDirect3DDevice9Proxy::Reset() Failed...
D3DERR_INVALIDCALL
Resetting with old settings
Device Reset failure -- Crash imminent. Fail code D3DERR_INVALIDCALL
IDirect3DDevice9Proxy::Reset()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24S8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 600
BackBufferWidth: 800
EnableAutoDepthStencil: 1
Flags: NULL
FullScreen_RefreshRateInHz: 75
hDeviceWindow: 0
MultiSampleType (Antialiasing): D3DMULTISAMPLE_NONE * Can be overridden by drivers
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 0
EQ Requesting Display Mode 800x600
-- End Requested Direct3D9 Device Information --
-- Actual Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24S8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 600
BackBufferWidth: 800
EnableAutoDepthStencil: 1
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D9 Device Information --
IDirect3DDevice9Proxy::Reset() Failed...
D3DERR_INVALIDCALL
Resetting with old settings
Device Reset failure -- Crash imminent. Fail code D3DERR_INVALIDCALL
Top
Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Sep 23, 2004 7:07 pm

Missing the top part of the log that shows version information. One thing I see is you're running old drivers for your video card, it may help to download the latest ones from nvidia.com.

Are you using ALT+ENTER? It appears to crash when you hit that twice. EQ stores 2 resolutions, one for full screen and one for windowed. When you hit ALT+ENTER it switches between them, and this is not normally a problem. It may be confusing you if they are not both set to the same thing.
Top
nickludlow
Non-Subscriber
Posts: 1
Joined: Wed Jul 21, 2004 11:26 am

Same thing is happening to me.

Post by nickludlow » Fri Sep 24, 2004 10:42 am

I can not alt + enter to get full screen....I can not ctrl + shift + f to get it either. Comes up bigger then a quarter screen but thats it. I upgraded to Service pack 2 for XP pro. That was the only change...Well I d/loaded the new version of WinEQ. I have uninstalled and reinstalled it 4 times and still not working.

Please help.
Top
Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Fri Sep 24, 2004 1:06 pm

Please review the feature list (there's even a nifty chart) on the WinEQ download page. Have fun :)
Top
Post Reply

Return to “GamingTools Public::WinEQ 1.x Lite”