Authentication problems..

EQPlayNice Lite discussion

Moderators: Lavish Software Team, Moderators

Decimal
Non-Subscriber
Posts: 1
Joined: Wed Jul 14, 2004 9:19 am

Post by Decimal » Thu Jul 15, 2004 8:58 am

Tenchu_78 wrote:Authentication failed (-10057) You will need to successfully authenticate and restart the game. Still same problem just different number =\
Same problem, same numbers.

Stormycloud
Non-Subscriber
Posts: 29
Joined: Wed Jul 14, 2004 12:12 pm

Post by Stormycloud » Thu Jul 15, 2004 9:37 am

This Version of everquest is not Currently supported by EQplaynice for your access group. You may need to report this version infomarion " eqgames.exe JUl 14 2004 18 :38 :41 " to lavish Software.

Barrule
GamingTools Subscriber
Posts: 6
Joined: Wed Jul 14, 2004 1:21 pm

Post by Barrule » Thu Jul 15, 2004 10:36 am

Same :(


This Version of everquest is not Currently supported by EQplaynice for your access group. You may need to report this version infomarion " eqgames.exe JUl 14 2004 18 :38 :41 " to lavish Software.

Sent payment today too

Barr.

BlindMelonChitlin
Non-Subscriber
Posts: 5
Joined: Sun Jul 11, 2004 10:59 pm

Post by BlindMelonChitlin » Thu Jul 15, 2004 11:42 am

still having same authentication problems. have version 1.07. Still problems with the server?
Damn, next week an i can have the good one, i just need a week with this one for my hydra's -P

Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Jul 15, 2004 11:52 am

The server is fine, the problem currently is that they patched today and I'm about to get the server set up with the information for it.

Tenchu_78
Posts: 8
Joined: Wed Jul 14, 2004 1:05 pm

Post by Tenchu_78 » Thu Jul 15, 2004 1:16 pm

Any suggestions for fixing or is the authentication a server side problem still?

IMMEESH
Posts: 1
Joined: Wed Jul 14, 2004 7:32 pm

Post by IMMEESH » Thu Jul 15, 2004 9:15 pm

I can log in to the forum successfully, but I can't login with pre-authenticate.
Authentication failed -10057 is the message.

I'm using version 1.09. Thoughts?

Morgeal
Posts: 1
Joined: Wed Jul 14, 2004 4:39 pm

Post by Morgeal » Thu Jul 15, 2004 11:08 pm

I installed and tried to register my account it gave me the -14 error then ever time i try to load EQ it crashes the game. I had to uninstall it and probably will not ever load it again, until i read some good reports on it. Like most good ideas this one seems to have gone that money is more inportant the performance. Promises to fix something are just that promises. I already get enough of those from Sony. I will suffer through one companies broken promises rather then several.

Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Jul 15, 2004 11:18 pm

:lol:

Let me explain something real quick. Nobody posts unless they have problems. This is also the case on the old forums, go take a look at http://teqim.sourceforge.net. If you based your opinion on the forums, you wouldn't see more than one or two people that have anything good to say :)

The -14 error is older, and is fixed for most people. It may be solved for you simply by trying the newest version. There are reported issues with 10-20 people.

Have fun :)

battierpeeler
Non-Subscriber
Posts: 3
Joined: Fri Jul 16, 2004 5:49 am

hi

Post by battierpeeler » Fri Jul 16, 2004 6:31 am

uhh hi :D

well i had been using eqplaynice for about 2 weeks before this change. i dont mind it at all. i am still very grateful that there is a free version. i was just kinda having problems running it. i downloaded 1.09 and made a board account but i get the 10057 error. basically the same thing as this guy:
I can log in to the forum successfully, but I can't login with pre-authenticate.
Authentication failed -10057 is the message.

I'm using version 1.09. Thoughts?
just wondering if i did something wrong or.... well i dont know what else.

anyways thank you for your time and the product you put out. i havent been using it for long but i love it. :D

battierpeeler
Non-Subscriber
Posts: 3
Joined: Fri Jul 16, 2004 5:49 am

Post by battierpeeler » Fri Jul 16, 2004 6:39 am

This is a windows sockets error, and I am working on solving the problem.

More specifally, your computer prematurely disconnected from our license server.
found that on general forum. answers my question :lol:

k look forward to anything you can do or say to help with this :D

again thanks for the product. i would contribute money if i wasn't a kid with no job mooching off my parents :o

edit: haha as soon as i typed this i tryed it again (like 9th time), and it just worked. i didnt change anything or do anything different. soooo uhh i guess either the server needs time between the time you make a board membership and pre-authenticate or maybe it was busy or maybe somehow it just bugged past whatever issue it was having.

Himeo
Non-Subscriber
Posts: 10
Joined: Wed Jul 14, 2004 6:42 pm

Post by Himeo » Fri Jul 16, 2004 9:00 am

I've been using EQPN since January and I do not think playing eq without EQPN enjoyable. When it is up and working (within hours of every single patch) it fixes a horrible bug that bad Verant programing created, and gay SoE programing brought to the surface. When I alt tab out without EQPN my system shuts down almost completely for 30- 40 seconds. When I alt tab WITH EQPN I have control of my processor, and that's amazing.

As for the money thing, EQPN has been in an open beta up until a few weeks ago. Beta's are free, but when things leave beta most companies force you to buy the software. Lax is giving the EQ community a free fix to a basic EQ programing flaw. If you want more you'll have to poney up the money for the special features.

battierpeeler
Non-Subscriber
Posts: 3
Joined: Fri Jul 16, 2004 5:49 am

Post by battierpeeler » Fri Jul 16, 2004 10:35 am

ughhh the problem with 10057 still exists :cry: :cry: :cry: :cry:

Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Fri Jul 16, 2004 10:38 am

Hello. This 10057 problem, did you re-download EQPlayNice 1.09 today? I updated Lavish.dll in the downloads, but did not give it a new version number as the change did not directly affect EQPN or WinEQ, and this problem is rare. If you re-downloaded 1.09 today and still receive this problem, I will begin working on correcting this issue now.

patrickm
Non-Subscriber
Posts: 1
Joined: Wed Jul 14, 2004 11:35 am

Post by patrickm » Fri Jul 16, 2004 1:17 pm

I get the 10057 problem with EQPN 1.09 (just downloaded now) AND with WinEQ 0.996 (also redownloaded, looks like you updated the build)

Thanks.

Post Reply