EQPlayNice Lite discussion
Moderators: Lavish Software Team, Moderators
-
jackburton
- Posts: 3
- Joined: Mon Feb 21, 2011 6:26 am
Post
by jackburton » Sat Jan 19, 2013 9:10 pm
When I run either WinEQ2 or Inner Space, I get the message: Succesfully connected to Lavish Software, but failed to keep the connection alive after several attempts....
I'm using windows 7 64
I'm not behind a firewall, I have ran spybot and malware, along with an anti virus scan with nothing found. Is there a port that I need to forward on my router? I have this pc setup on the dmz so that the router shouldn't effect my connection.
Any help is appreciated.
-
Enoah35
- GamingTools Subscriber
- Posts: 1
- Joined: Thu Apr 15, 2010 9:16 am
Post
by Enoah35 » Sat Jan 19, 2013 9:23 pm
I too am having this issue. I was using WinEQ2 but crashed so I tried to log in again and I can't seem to connect to neighther WinEQ2 nor Innerspace. Was doing fine till about an hour ago.
-
brawner
- Non-Subscriber
- Posts: 1
- Joined: Tue Nov 20, 2012 6:19 pm
Post
by brawner » Sat Jan 19, 2013 9:27 pm
Same problem..... Need some attention on this issue. Wondering if maybe Lavish's server that hosts WinEQ/Playnice is down?
-
jackburton
- Posts: 3
- Joined: Mon Feb 21, 2011 6:26 am
Post
by jackburton » Sat Jan 19, 2013 9:27 pm
I just double checked my router and this IP was not the one in dmz, I put it in the dmz and I am now able to get connected. Is there a static ip that I can just use port forwarding/allowed ip, so I don't have to put this pc in the dmz part of my router?
-
Lax
- Owner
- Posts: 6634
- Joined: Fri Jun 18, 2004 6:08 pm
Post
by Lax » Sat Jan 19, 2013 9:32 pm
I was testing a new license server tonight, looks like I have some work to do on that yet. You can re-try or, worst case, run "ipconfig /flushdns" from a command prompt or the Windows start menu