EQPlayNice Lite discussion
Moderators: Lavish Software Team, Moderators
-
The Master
- Non-Subscriber
- Posts: 2
- Joined: Wed Jul 14, 2004 6:43 pm
- Location: Vazaelle/Wisconsin
Post
by The Master » Thu Jul 15, 2004 8:20 am
I'm usong 1.07 and when I launch EQ, I get a message stating "This version of Everquest is not currently supported by EQPlayNice for your access group. You may need to report this version information 'eqgame.exe Jul 14 2004 18:38:41' to Lavish Software.
Does this mean that they've patched since my version of EQPN was created, and I'll need to get a new one (when there is one), or is this a symptom of a configuration error on my side?
Thanks.
-
xjx
- Non-Subscriber
- Posts: 5
- Joined: Wed Jul 14, 2004 1:24 pm
Post
by xjx » Thu Jul 15, 2004 9:10 am
the servers are patched, and you need to sit tight until Lax releases a new version, that fit's with the new server patch
-
Lax
- Owner
- Posts: 6634
- Joined: Fri Jun 18, 2004 6:08 pm
Post
by Lax » Thu Jul 15, 2004 12:22 pm
Sorry for the wait, it's all ready now
-
Boppy
- Non-Subscriber
- Posts: 8
- Joined: Wed Jul 14, 2004 1:24 pm
Post
by Boppy » Fri Jul 16, 2004 9:07 am
I am getting same message with 1.09 now.
-
Himeo
- Non-Subscriber
- Posts: 10
- Joined: Wed Jul 14, 2004 6:42 pm
Post
by Himeo » Fri Jul 16, 2004 9:24 am
(left blank)
Last edited by
Himeo on Fri Jul 16, 2004 9:28 am, edited 2 times in total.
-
Lax
- Owner
- Posts: 6634
- Joined: Fri Jun 18, 2004 6:08 pm
Post
by Lax » Fri Jul 16, 2004 9:25 am
EQPlayNice is now updated, and you do not need to re-download. This patch is automatically supported by our server. Have fun guys
-
Boppy
- Non-Subscriber
- Posts: 8
- Joined: Wed Jul 14, 2004 1:24 pm
Post
by Boppy » Fri Jul 16, 2004 9:33 am
Just tried to login and still getting same error message.
-
anerak
- Non-Subscriber
- Posts: 1
- Joined: Wed Jul 14, 2004 2:36 pm
Post
by anerak » Fri Jul 16, 2004 9:33 am
thanks for all your work, lax *thumbs up*
-
Lax
- Owner
- Posts: 6634
- Joined: Fri Jun 18, 2004 6:08 pm
Post
by Lax » Fri Jul 16, 2004 9:36 am
my apologies. It's working now sorry
-
Vittra
- GamingTools Subscriber
- Posts: 2
- Joined: Thu Jul 08, 2004 5:30 am
Post
by Vittra » Fri Jul 16, 2004 9:36 am
also getting the error still after the update;)
edit:working now
Last edited by
Vittra on Fri Jul 16, 2004 9:40 am, edited 1 time in total.
-
Stormycloud
- Non-Subscriber
- Posts: 29
- Joined: Wed Jul 14, 2004 12:12 pm
Post
by Stormycloud » Fri Jul 16, 2004 9:38 am
CHeck to make sure you have V1.09
-
Boppy
- Non-Subscriber
- Posts: 8
- Joined: Wed Jul 14, 2004 1:24 pm
Post
by Boppy » Fri Jul 16, 2004 9:40 am
It's working thanks!
-
Lax
- Owner
- Posts: 6634
- Joined: Fri Jun 18, 2004 6:08 pm
Post
by Lax » Fri Jul 16, 2004 9:40 am
I had mistakenly updated the subscribers twice instead of adding the non-subscribers, when I made the announcement. About a minute later I realized
Let me know if you have any further problems.
-
Himeo
- Non-Subscriber
- Posts: 10
- Joined: Wed Jul 14, 2004 6:42 pm
Post
by Himeo » Fri Jul 16, 2004 9:43 am
If EQPN is going to be auto-updating, can you add a way to manually check the current update please? Thanks Lax.