WinEQ2 High DPI scaling issues

WinEQ 2.0 Pro discussion and support

Moderators: Lavish Software Team, Moderators

Post Reply
GamingTools Subscriber
Posts: 9
Joined: Wed Jul 14, 2004 10:45 pm

WinEQ2 High DPI scaling issues

Post by Devestator » Wed Feb 05, 2014 12:40 pm

I recently started playing everquest again on some EMU servers. So I'm using WinEQ2 for them. However, on my laptop that has a 3200 x 1800 resolution display, WinEQ2 appears to have some scaling issues. I'm not sure what it's caused by. If I start EQ in windowed mode with a patchme shortcut, the window loads full screen and looks fine. If I start a WinEQ2 session for the same copy of EQ using the same eqclient.ini and use Full Screen Emulated, the graphics appear twice the size as they should. Meaning all I can see initially is the top left 1/4 of the EULA box.

Is there something I can do to resolve this so that I can use WinEQ2 when playing on my laptop?


Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Sat Feb 08, 2014 5:52 pm

Well, if it is DPI related, try adjusting the DPI setting in Windows. If that is already set at 100% or changing it does not fix the problem, then we'll have to go from there.

It could just be something in your eqclient.ini file that can be fixed by resetting it (e.g. back up, delete)

Post Reply