1) Reboot system
2) Start EQPN, WINEQ2 and another unmentionable.
3) Execute EQ through right click menu
4) /camp desktop
5) Attempt to styart EQ again
This point I get an error -22 from WinEQ2b5 and a MS crash detected box.
6) Without rebooting, exit WinEQ2Bb5start WinEQ1.38
7) Execute EQ from WinEQ menu
play eq and log in and out as neededNo log available. If you need me to post debug information I will get on that.WinEQ 2 System Information
System:
-----------------------------------
Windows Version: Microsoft Windows XP/Service Pack 1/2600.xpsp2.030422-1633
System Physical RAM: 560/1023MB
Page File: 2161/2461MB
Virtual Memory: 1990/2047MB (Extended: 0MB)
CPU 1: AMD Athlon(tm) XP 3200+ @ 2194MHz
Video 1: \\.\DISPLAY1/ALL-IN-WONDER 9800 SERIES
Video 2: \\.\DISPLAY2/ALL-IN-WONDER 9800 SERIES - Secondary
Video 3: \\.\DISPLAYV1/NetMeeting driver
Video 4: \\.\DISPLAYV2/RDPDD Chained DD
Sound: NVIDIA(R) nForce(TM) Audio
DirectX: 4.09.00.0904
Internet Explorer: 6.0.2800.1106
Direct3D9:
-----------------------------------
Direct3D8:
-----------------------------------
DirectInput8:
-----------------------------------
EverQuest:
-----------------------------------
Profile 1: WinEQ 2.0 Default Profile
EQ Path: C:\Program Files\Sony\EverQuest Trilogy
EQClient.ini: .\eqclient.ini
Video Adapter: Application Controlled
Luclin models: 7 (+35 min RAM)
Texture Compression: ON (+0 min RAM)
Dynamic Lighting: ON (+4 min RAM)
Texture Caching: ON (+0 min RAM)
Texture Quality: MEDIUM (+30 min RAM)
Sky: COMPLEX (+10 min RAM)
Load Velious Armors with Luclin: ON (+51 min RAM)
Calculated minimum RAM: 413MB (BASE+130MB)
Level of Detail: 0
Sky: 2
MaxFPS: 100
Additional setting: HardwareTnL=TRUE
Additional setting: VertexShaders=1
Additional setting: 20PixelShaders=1
Additional setting: 1xPixelShaders=1
EQPlayNice:
-----------------------------------
If you're starting EQPN alongside WinEQ 2.0 you should no longer do so, EQPN is built in now. Try it without running EQPN and see if that makes a difference