BSOD AKA: Blue Screen Of Death

General discussions

Moderator: Lavish Software Team

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

BSOD AKA: Blue Screen Of Death

Post by tcm » Thu Aug 26, 2004 3:20 am

Hail and well met

I been using your awsome proggy for a while now with no problems at all.

recently upgraded to a 6800 ultra

all games run fantastic.

when I run wineq my computer BSOD with a nv4_disp.dll STOP
I can run doom 3 FULL on with no problems ..

eq in 2 wineq sessions bamn BSOD within 5 minutes .. and thats stretching it.

I have updated Bios .. MB drivers and tried 5 sets of Forceware for the card..

here is the WinEQ.log you wanted
Available System Physical RAM: 1764MB/2045MB. Load 13%
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D9Proxy::GetAdapterCount()=1
IDirect3D9Proxy::GetAdapterIdentifier(0)...NVIDIA GeForce 6800 Ultra
IDirect3D9Proxy::GetDeviceCaps()
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
WEQ_CreateWindowExA(40000,_EverQuestwndclass,EverQuest,90000000,0,0,100,40,0,0,400000,0)
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::GetAdapterCount()=1
IDirect3D8Proxy::GetAdapterIdentifier(0)...NVIDIA GeForce 6800 Ultra
IDirect3D8Proxy::GetDeviceCaps()
IDirect3D8Proxy::GetAdapterModeCount()
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
IDirect3D8Proxy::Release()
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3D8Proxy::CreateDevice()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 0
Initializing resolution to 1280x1024
D3DDEVTYPE_HAL
D3DCREATE_MULTITHREADED
D3DCREATE_SOFTWARE_VERTEXPROCESSING
-- End Requested Direct3D8 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 470MB
WinEQ window size: AUTO
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
WEQ_DirectInput8Create(1CC0000,800,0€y¿:H¢Mª™]dí6—,29A9150,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
IDirect3DDevice8Proxy::Reset()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 0
BackBufferWidth: 0
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
BackBufferHeight corrected to 1024
BackBufferWidth corrected to 1280
EQ Display Mode 1280x1024
-- End Requested Direct3D8 Device Information --
-- Actual Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D8 Device Information --
Available Texture Memory: 471MB
WinEQ window size: AUTO
IDirect3D8Proxy::Release()
WEQ_DirectInput8Create(400000,800,0€y¿:H¢Mª™]dí6—,88F0A4,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D9Proxy::CreateDevice()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D16
BackBufferCount: 1
BackBufferFormat: D3DFMT_X1R5G5B5
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 100
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 0
D3DDEVTYPE_HAL
D3DCREATE_MIXED_VERTEXPROCESSING
-- End Requested Direct3D9 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 475MB
WinEQ window size: AUTO
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format not available
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format not available
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format not available
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
Available System Physical RAM: 1321MB/2045MB. Load 35%
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D9Proxy::GetAdapterCount()=1
IDirect3D9Proxy::GetAdapterIdentifier(0)...NVIDIA GeForce 6800 Ultra
IDirect3D9Proxy::GetDeviceCaps()
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
WEQ_CreateWindowExA(40000,_EverQuestwndclass,EverQuest,90000000,0,0,100,40,0,0,400000,0)
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::GetAdapterCount()=1
IDirect3D8Proxy::GetAdapterIdentifier(0)...NVIDIA GeForce 6800 Ultra
IDirect3D8Proxy::GetDeviceCaps()
IDirect3D8Proxy::GetAdapterModeCount()
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
IDirect3D8Proxy::Release()
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3D8Proxy::CreateDevice()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
Initializing resolution to 1280x1024
D3DDEVTYPE_HAL
D3DCREATE_MULTITHREADED
D3DCREATE_SOFTWARE_VERTEXPROCESSING
-- End Requested Direct3D8 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 405MB
WinEQ window size: AUTO
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
WEQ_DirectInput8Create(1CC0000,800,0€y¿:H¢Mª™]dí6—,29A9268,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
IDirect3DDevice8Proxy::Reset()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 0
BackBufferWidth: 0
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
BackBufferHeight corrected to 1024
BackBufferWidth corrected to 1280
EQ Display Mode 1280x1024
-- End Requested Direct3D8 Device Information --
-- Actual Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D8 Device Information --
Available Texture Memory: 410MB
WinEQ window size: AUTO
IDirect3D8Proxy::Release()
WEQ_DirectInput8Create(400000,800,0€y¿:H¢Mª™]dí6—,88F0A4,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D9Proxy::CreateDevice()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
D3DDEVTYPE_HAL
D3DCREATE_MIXED_VERTEXPROCESSING
-- End Requested Direct3D9 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 405MB
WinEQ window size: AUTO
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
Available System Physical RAM: 993MB/2045MB. Load 51%
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D9Proxy::GetAdapterCount()=1
IDirect3D9Proxy::GetAdapterIdentifier(0)...NVIDIA GeForce 6800 Ultra
IDirect3D9Proxy::GetDeviceCaps()
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
WEQ_CreateWindowExA(40000,_EverQuestwndclass,EverQuest,90000000,0,0,100,40,0,0,400000,0)
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::GetAdapterCount()=1
IDirect3D8Proxy::GetAdapterIdentifier(0)...NVIDIA GeForce 6800 Ultra
IDirect3D8Proxy::GetDeviceCaps()
IDirect3D8Proxy::GetAdapterModeCount()
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
IDirect3D8Proxy::Release()
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3D8Proxy::CreateDevice()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
Initializing resolution to 1280x1024
D3DDEVTYPE_HAL
D3DCREATE_MULTITHREADED
D3DCREATE_SOFTWARE_VERTEXPROCESSING
-- End Requested Direct3D8 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 366MB
WinEQ window size: AUTO
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
WEQ_DirectInput8Create(1CC0000,800,0€y¿:H¢Mª™]dí6—,29A9268,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
IDirect3DDevice8Proxy::Reset()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 0
BackBufferWidth: 0
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
BackBufferHeight corrected to 1024
BackBufferWidth corrected to 1280
EQ Display Mode 1280x1024
-- End Requested Direct3D8 Device Information --
-- Actual Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D8 Device Information --
Available Texture Memory: 371MB
WinEQ window size: AUTO
IDirect3D8Proxy::Release()
WEQ_DirectInput8Create(400000,800,0€y¿:H¢Mª™]dí6—,88F0A4,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1280x1024, D3DFMT_X8R8G8B8
IDirect3D9Proxy::CreateDevice()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 1024
BackBufferWidth: 1280
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
D3DDEVTYPE_HAL
D3DCREATE_MIXED_VERTEXPROCESSING
-- End Requested Direct3D9 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 366MB
WinEQ window size: AUTO
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK



thanks

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

Oh yeah

Post by tcm » Thu Aug 26, 2004 3:22 am

direct x 9.0c
windows XP Pro

Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Aug 26, 2004 9:57 am

Hmmm, EQ seems to be ignoring the available modes when it tries to put you in full screen on that first session. And it's also on software vertex processing, which is my guess as to what's causing the crash. Check your eqclient.ini files and make sure to remove any HardwareTnL=FALSE etc. It looks like you're running multiple directories, and they are set differently.

I'll have it ignore that setting in the future.

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

thanks

Post by tcm » Thu Aug 26, 2004 11:03 am

thanks,

I checked the ini .. no hardware TL in there ..
I put play in window= True .. and I copied the ini into my second directory ..
let me give it a whirl

Thanks for your hard work

T

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

same

Post by tcm » Thu Aug 26, 2004 11:16 am

I took out vertex and forced window mode ..copied the ini into the other directory .

1 ..works great
2 ..10 seconds ..BSOD
the vertex ect. was in there for my trouble shooting purposes .. I put them in to see if it would work with them on.

do you have anything else you would like me to try for you Lax?

thanks again
T

Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Aug 26, 2004 12:44 pm

My apologies, flight leaves in a couple hours (see news) so I wont have time to do more than answer message board questions until next Wednesday. Try running two from the same directory. In early WinEQ testing, multiple directories crashed for many people where the same directory did not. You can use the custom eqclient.ini option if you want to use different settings. Performance-wise, you'll probably be better off with 1 directory anyway. Give that a shot and let me know

Venthos
GamingTools Subscriber
Posts: 28
Joined: Wed Jul 14, 2004 7:21 am

Post by Venthos » Thu Aug 26, 2004 8:26 pm

Interesting.

I frequently get BSoD's as well same nv4_disp.dll thing.

I have assumed it was a memory issue as I don't recall getting many if at all when running only two copies (each from a diff directory) but once I had started up a 3rd if I did a lot of intensive things like zoning and what not it would cause issues and sometimes BSoD. Running two EQ's (one is set for higher texture quality/etc., the other is lower for my "boxes) I would use of all by 15% or so usually of my 1GB RAM. Running the third would eat all my physical memory.

Would be interesting to find out the BSoD is from this. Both my eqclient.ini's have TnL set to FALSE as prior it had been causing lots of issues (though back when I used EQW) if I hadn't had that setting with failing to load scenery in a zone which would cause a crash the next time I zoned.

Card is VisionTek GeForce4 Ti 4600

I am trying out the custom eqclient.ini setting now to just base it out of ONE EQ directory yet keep the differentiated texture settings to see if that fixes things, leaving the TnL to FALSE. If I still BSoD, I'll remove those as well and try.

I'll post the results as I mess with things.

When 3boxing though nv4_disp.dll BSoDs are frequent and I can usually rely on at least one a night if I zone enough. Seeing the HD light go insane and my CPU usage lower down as it accessed my virtual memory during the zones lead to my memory assumption. We'll see though.

-Venthos

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

hmm

Post by tcm » Thu Aug 26, 2004 9:26 pm

ok .. will try the 1 directory thing tonight..

Im starting to think it may be a directx 9.0C thing possible .. as I cruise the boards more and more are having problems with eq and direct x 9c

just a thought.

take care of bidness lax, we feel for you. We'll hold the fort till you get back.

hope you have a safe trip.

V/R
T

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

roll back

Post by tcm » Thu Aug 26, 2004 9:28 pm

I will try out of one directory and first BSOD im formating and will post if direct x9b still causes this problem.

cya

T

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

roll back

Post by tcm » Thu Aug 26, 2004 9:31 pm

I will try out of one directory and first BSOD im formating and will post if direct x9b still causes this problem.

cya

T

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

UPDATE: FIX

Post by tcm » Fri Aug 27, 2004 2:08 am

fixed

direct x 9.0c was causing the problem for me.

I went to
http://downloads.guru3d.com/download.php?det=522

and downloaded direct x uninstall .. it reverts you back to direct x 8.0 then I reinstalled 9.0b from my graphic card cd and bamn ..super 4 chars running out of one directory

thanks
T

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

oh yeah

Post by tcm » Fri Aug 27, 2004 2:09 am

I decided not to reformat after using this .. this proggy worked like a dream.

P.S. have your windows cd in the drive when you run it

T

tcm
Non-Subscriber
Posts: 11
Joined: Mon Aug 16, 2004 11:08 am

so much for that

Post by tcm » Fri Aug 27, 2004 8:36 am

heh last night ran for 5 hours with three chars. today .. BSOD same with only 2.. weird
must be the new card or somthing eq patched

WarDave
GamingTools Subscriber
Posts: 76
Joined: Fri Aug 06, 2004 8:22 pm

Post by WarDave » Sun Sep 19, 2004 12:11 pm

Same BSOD for me I have tried different drivers but I bet its the way EQs dealing with the driver thats making it crash. I dont BSOD in any other games.

kaludram
Non-Subscriber
Posts: 3
Joined: Wed Jul 14, 2004 1:51 pm

Post by kaludram » Mon Sep 20, 2004 2:15 pm

BSOD/restarting ONLY happens in a certain subset of zones for me. Many zones I can run in just fine. This is probably why you thought you fixed it, as you did not enter what I have termed "crash zones".

Atm my personal list of crash zones consists of:
Plane of Tranquility
Plane of Fire
Shadeweaver's Thicket
Tennebrous Mountains
Dranik's Scar
Natimbi

If I enter any of these zones with 2 accounts up I am almost certain to bluescreen (rebooting before I shut off auto reboot).

Error is ALWAYS nv4_disp.dll.

What I have attempted:

- older Dx versions
- older video driver versions
- MB bios update
- complete reinstall of EQ
- removing nv4_disp.dll
- complete format (including repartitioning)

No success. All models off, sound off, particles off. I do find if I have clip plane at 0 on all accounts it happens a bit less often.

This occurs in EQW, WinEQ, and even native EQ. It does NOT happen in any other program except EQ, even other graphically intensive programs.

You will note from this thread that it is a problem for many other NVidia users, and SOE really isn't addressing it very well. To be honest I am tempted to make a thread for each of my accounts if they don't start working on this soon. Maybe then they will recognize it as a problem.

Locked