Ok, at EULA screen.
Before I hit my macro, DisplayInfo says:
Code: Select all
Adapter resolution: 1920x1200
Current display mode: 1914x1144 (windowed)
Window viewable size: 1914x1144
Display Scale: 100.0%x100.0%, Distortion: 0.0%
Then I hit my macro:
Code: Select all
Adapter resolution: 1920x1200
Current display mode: 2016x1620 (windowed)
Window viewable size: 2028x1676
Display Scale: 100.6%x103.5%, Distortion: 2.9%
So as you'd expect from those numbers, I am getting ~1 inch of my EQ screen overlapping onto my second monitor and it overlaps my taskbar. (Buttons still highlight properly, as I mouse over them.)
Weird, that disobey's my macro.
If I set the window position to 0,0, and hit my macro:
Code: Select all
Adapter resolution: 1920x1200
Current display mode: 1952x1248 windowed)
Window viewable size: 1920x1172
Display Scale: 98.4%x93.9%, Distortion: 4.5%
Now buttons, window grab controlls, etc are off as to where I would expect them.
Anything else I can add? I have two monitors, primary is where I have EQ windowed. It's 1920x1200. Secondary is 1920x1080. Windows 7, 64 bit. I could do the DXDiag thing if you would find it useful.