WinEQ 2.0 RC3 down - update in progress

WinEQ 2.0 Lite discussion

Moderators: Lavish Software Team, Moderators

Post Reply
Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

WinEQ 2.0 RC3 down - update in progress

Post by Lax » Thu Nov 04, 2004 12:37 pm

Before this gets posted, WinEQ 2.0 RC3 wont work for the moment. I'm updating WinEQ 2.0 to RC4 at this time. Sorry, this should be done in about 10 minutes.

Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Nov 04, 2004 12:58 pm

The update has been completed, simply restart WinEQ 2.0 to update to RC4.

jabon
Non-Subscriber
Posts: 17
Joined: Tue Aug 31, 2004 8:19 pm

Post by jabon » Thu Nov 04, 2004 2:20 pm

Perhaps others are experiencing this too, but the patcher seems to be in an infinite loop downloading Lavish.dll and EQPlayNice.dll. End Process won't work, it results in an error saying that operation is not valid for this program. I'm trying to restart now.

jabon
Non-Subscriber
Posts: 17
Joined: Tue Aug 31, 2004 8:19 pm

Post by jabon » Thu Nov 04, 2004 2:23 pm

Restart worked, I got a complaint that wineq2.dll could not start because of the shutdown, perhaps that is where the loop is happening.

Eryi
GamingTools Subscriber
Posts: 8
Joined: Wed Jul 14, 2004 5:52 am

Post by Eryi » Thu Nov 04, 2004 9:33 pm

Perhaps others are experiencing this too, but the patcher seems to be in an infinite loop downloading Lavish.dll and EQPlayNice.dll. End Process won't work, it results in an error saying that operation is not valid for this program. I'm trying to restart now.
The End Process does work, but you have to be VERY VERY quick. The Processes switch between WinEQ2.exe and Lavishpatch(er).exe (Sorry, can't remember if there was an "er" on the end of that or not) and it switches between the two.. You can't pick the patcher and attempt to kill it after it switches to the WinEQ2.exe, or it'll complain.

If your quick, you can Select, End and kill the process before it switches, that will stop the loop.

Lax
Owner
Posts: 6634
Joined: Fri Jun 18, 2004 6:08 pm

Post by Lax » Thu Nov 04, 2004 9:36 pm

In the next release it's going to pop up a message box if it couldn't overwrite a file

Post Reply