Can't get hotkeys to work

nukinmage · Post by **nukinmage** » Thu Aug 26, 2004 8:30 pm

ok I can log in fine but when I try to use any of the hotkeys or even try to get my curser outside the EQ box noting happens. I checked the global pref settings and all the hotkeys are set up. Can anyone give me suggestions? I am trying to run 2 boxes side by side.

Post by **Lax** » Fri Aug 27, 2004 9:32 am

With WinEQ 1.31? Post your WinEQ.log and I'll see if anything appears abnormal. Are you using default hotkeys or your own?

nukinmage · Post by **nukinmage** » Fri Aug 27, 2004 3:22 pm

Ummmmmm how do you find the log to post it?
Forgot to add. I am using the defualt hotkeys. and yes it's WinEQ 1.31.
nm figured out the log part here it is :
WEQ_HookPatcher()
Available System Physical RAM: 667MB/1023MB. Load 34%
CreateProcess(eqgame.exe patchme)
Available System Physical RAM: 672MB/1023MB. Load 34%
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1024x768, D3DFMT_X8R8G8B8
IDirect3D9Proxy::GetAdapterCount()=1
IDirect3D9Proxy::GetAdapterIdentifier(0)...RADEON 9600 SERIES
IDirect3D9Proxy::GetDeviceCaps()
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D9Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
WEQ_CreateWindowExA(40000,_EverQuestwndclass,EverQuest,90000000,0,0,100,40,0,0,400000,0)
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1024x768, D3DFMT_X8R8G8B8
IDirect3D8Proxy::GetAdapterCount()=1
IDirect3D8Proxy::GetAdapterIdentifier(0)...RADEON 9600 SERIES
IDirect3D8Proxy::GetDeviceCaps()
IDirect3D8Proxy::GetAdapterModeCount()
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
IDirect3D8Proxy::Release()
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1024x768, D3DFMT_X8R8G8B8
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3D8Proxy::CreateDevice()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 768
BackBufferWidth: 1024
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 0
Initializing resolution to 1024x768
D3DDEVTYPE_HAL
D3DCREATE_MIXED_VERTEXPROCESSING
D3DCREATE_MULTITHREADED
-- End Requested Direct3D8 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 301MB
WinEQ window size: AUTO
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
WEQ_DirectInput8Create(1C40000,800,0€y¿:H¢Mª™]dí6—,2929310,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
IDirect3DDevice8Proxy::Reset()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 0
BackBufferWidth: 0
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
BackBufferHeight corrected to 768
BackBufferWidth corrected to 1024
EQ Display Mode 1024x768
-- End Requested Direct3D8 Device Information --
-- Actual Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 768
BackBufferWidth: 1024
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D8 Device Information --
Available Texture Memory: 304MB
WinEQ window size: AUTO
IDirect3D8Proxy::Release()
WEQ_DirectInput8Create(400000,800,0€y¿:H¢Mª™]dí6—,88F0A4,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
WEQ_Direct3DCreate9(31) successful
IDirect3D9Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1024x768, D3DFMT_X8R8G8B8
IDirect3D9Proxy::CreateDevice()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 768
BackBufferWidth: 1024
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 72
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_IMMEDIATE
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 0
D3DDEVTYPE_HAL
D3DCREATE_HARDWARE_VERTEXPROCESSING
-- End Requested Direct3D9 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 301MB
WinEQ window size: AUTO
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D9Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice9Proxy::Reset()
-- Requested Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 0
BackBufferWidth: 0
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
BackBufferHeight corrected to 768
BackBufferWidth corrected to 1024
EQ Requesting Display Mode 1024x768
-- End Requested Direct3D9 Device Information --
-- Actual Direct3D9 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 768
BackBufferWidth: 1024
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D9 Device Information --
Available Texture Memory: 304MB
WinEQ window size: AUTO
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1024x768, D3DFMT_X8R8G8B8
IDirect3D8Proxy::GetAdapterCount()=1
IDirect3D8Proxy::GetAdapterIdentifier(0)...RADEON 9600 SERIES
IDirect3D8Proxy::GetDeviceCaps()
IDirect3D8Proxy::GetAdapterModeCount()
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,0)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,D3DFMT_X8R8G8B8,1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D32)... Format not available
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D24X8)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,2,D3DRTYPE_SURFACE,D3DFMT_D16)... Format OK
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_R5G6B5,D3DFMT_R5G6B5,0)... Format OK, forcing not available because adapter display mode is different
IDirect3D8Proxy::CheckDeviceType(0,D3DDEVTYPE_HAL,D3DFMT_X1R5G5B5,D3DFMT_X1R5G5B5,0)... Format not available
IDirect3D8Proxy::Release()
WEQ_Direct3DCreate8(220)...successful
IDirect3D8Proxy::GetAdapterDisplayMode()
AdapterDisplayMode 1024x768, D3DFMT_X8R8G8B8
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_A4R4G4B4)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT1)... Format OK
IDirect3D8Proxy::CheckDeviceFormat(0,D3DDEVTYPE_HAL,D3DFMT_X8R8G8B8,0,D3DRTYPE_TEXTURE,D3DFMT_DXT3)... Format OK
IDirect3D8Proxy::CreateDevice()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_D24X8
BackBufferCount: 1
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 768
BackBufferWidth: 1024
EnableAutoDepthStencil: 1
Flags: D3DPRESENTFLAG_LOCKABLE_BACKBUFFER
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 0
Initializing resolution to 1024x768
D3DDEVTYPE_HAL
D3DCREATE_MIXED_VERTEXPROCESSING
D3DCREATE_MULTITHREADED
-- End Requested Direct3D8 Device Information --
CreateDevice successful on adapter 0
Available Texture Memory: 298MB
WinEQ window size: AUTO
IDirect3DDevice8Proxy::SetGammaRamp()...OK
IDirect3DDevice8Proxy::SetGammaRamp()...OK
WEQ_DirectInput8Create(18730000,800,0€y¿:H¢Mª™]dí6—,1C59310,0)
IID_IDirectInput8A
WEQ_IDirectInput8A::CreateDevice(a+o ÕÏ¿ÇDEST)
Single-char Keyboard
WEQ_IDirectInput8A::CreateDevice(`+o ÕÏ¿ÇDEST)
Single-char Mouse
IDirect3DDevice8Proxy::Reset()
-- Requested Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 0
BackBufferWidth: 0
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
BackBufferHeight corrected to 768
BackBufferWidth corrected to 1024
EQ Display Mode 1024x768
-- End Requested Direct3D8 Device Information --
-- Actual Direct3D8 Device Information --
AutoDepthStencilFormat: D3DFMT_UNKNOWN
BackBufferCount: 0
BackBufferFormat: D3DFMT_X8R8G8B8
BackBufferHeight: 768
BackBufferWidth: 1024
EnableAutoDepthStencil: 0
Flags: NULL
FullScreen_RefreshRateInHz: 0
hDeviceWindow: 0
MultiSampleType: D3DMULTISAMPLE_NONE
PresentationInterval: D3DPRESENT_INTERVAL_DEFAULT
SwapEffect: D3DSWAPEFFECT_DISCARD
Windowed: 1
-- End Actual Direct3D8 Device Information --
Available Texture Memory: 301MB
WinEQ window size: AUTO
IDirect3D8Proxy::Release()

Post by **Lax** » Fri Aug 27, 2004 10:08 pm

Looks normal, not sure what to tell you. I will be back at my machines on Wednesday, but I cannot look for potential related problems in the code until then

nukinmage · Post by **nukinmage** » Sun Aug 29, 2004 5:17 pm

Ok I got it to where I can have my 2 accounts going at once. Seems I had a setting a bit off. Now if someone could explain to me how I can have my 2 screens side by side instead over one over the other. Is this an option only available with the upgrade? or do I have other settings off? ATM I have been playing with the full screen (even though its not set on full screen) so only 1 screen is visable at a time.
Thanks for the help.

Post by **Lax** » Mon Aug 30, 2004 1:34 am

Without subscribing, you have to either a) own a second monitor with a dual display video card, or b) use a large enough desktop resolution and a small enough EQ resolution that the windows can fit visibly on the screen. Pro users have the benefits of resizing windows, tiling, picture-in-picture, etc

nukinmage · Post by **nukinmage** » Mon Aug 30, 2004 2:12 pm

Ahhhh ok thanks for the info

nukinmage · Post by **nukinmage** » Mon Aug 30, 2004 4:51 pm

Ok now I subscribed but can't figure out how to resize my windows. atm they are in the left and right upper corners of my desktop. Being in this position the size of the box makes it almost impossible to read the text. I did make decrease the video setting. but what I was hoping for was for one box to take up the whole right side and the other box to take up the whole left side. I am a bit computer challanged so I need some feed back on how to do this. I tried to resize with my mouse but the mouse ends up going behind the box when I can get the mouse released.
Thanks for the info

Post by **Lax** » Mon Aug 30, 2004 6:12 pm

It's extremely difficult to make two sessions take up 100% of the screen without distorting them. The reason is that EQ would have to support a resolution that's full length in one direction, and half in another. For example, on a 1024x768 display you're talking a 512x768 or 1024x384 resolution, neither of which are available through your video card. What you can do is use wide-screen resolutions in the game. You want high numbers on the left, and low numbers on the right. The higher ratio, the wider the screen. Then, you use one window on the top half of your screen, and one on the bottom half. You will not be able to make them take up the entire screen, but you can use most of it. Once you do that, you can scale the windows to take up as much of the screen as you want and hopefully not have it look blurry.

If you're using "tiled" mode, you can't resize the windows. You can only resize normal mode